Dry Chemical Fire Extinguisher

Mounting

Fire extinguisher may be mounted on wall with patented swivel hook. Hook holds unit securely, even if bumped or pushed. Alternatively, extinguisher may be installed in surface or recess mounted cabinet. Due to low profile of fire extinguisher, recessed cabinet can fit into standard 3-5/8” (92mm) stud wall.

Accessibility

Extinguisher depth is 3” (76mm). When wall mounted, unit complies with 4” (102mm) maximum limit for protruding objects as required by the Americans with Disabilities Act (ADA), 2010 ADA Standards for Accessible Design, the International Building Code and ANSI/ICC ANSI A117.1.

Healthcare Facilities

Facilitates compliance with CMS accessibility requirements. Suitable for high risk environments when installed with ligature-resistant cabinet (see “Ligature-Resistant Cabinets“). Certified as “MR Conditional” for safe use in environments with magnetic resonance imaging (MRI) equipment up to 3 Teslas.

UL/ULC Rating

4A:80B:C

Capacity

10 lb. (4.54 kg).

Vessel

Extruded aluminum body with welded aluminum top and bottom caps and durable red powder coated finish.

Valve

Anodized aluminum valve with stainless steel handle and pull pin, rubber hose and anodized aluminum nozzle.

Agent

Monoammonium phosphate-based dry chemical.

Transportation

Meets US Department of Transportation requirements for packaging and shipping. Labeled per UN1044.

Quality Assurance

UL listed, compliant with NFPA 10 and tested and certified to ANSI/UL-299, ANSI/UL-711, CAN/ULC-5504 and CAN/ULC-5508. Fire extinguisher is fully assembled, filled, pressurized and tested prior to shipment.

Warranty

Six years.

Patents

Covered by U.S. patents 9,364,696; D760,443: D760,444: D777,566.